Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Operation and use
5
2. Press the button 4 repeatedly
until the required cup symbol
for the desired ground coffee
quantity is displayed.
4
3. Place an appropriate cup under
the coffee delivery spout (e.g.
coffee mug).
4. Fill the coffee powder shaft with
fresh powdered coffee.
5. Press OK (button 6) and keep
it pressed until the desired cup
filling amount is reached.
6. Release the button. The desired
cup filling level is now stored.
Repeat the
procedure if you also
C
wish to change the
filling level for the
other cup sizes.
38 / 233 EN
C
C
5.14 Preparing
coffee specialities
The milk system must be connected
6
in order to dispense coffee
specialities.
More information can be found in
chapter 4.4.
C
Fully Automatic Coffee Maker / User Manual
All values remain
stored even when
the coffee machine is
switched off. Should
you change your cup
size, you can adapt
the cup filling level
individually at any
time.
The
stored
filling
levels
each individual cup
symbol only applies
in powder mode.
Do not use soya or
rice milk because
good frothing results
are not possible with
these products.
cup
for
Publicité
Chapitres
Table des Matières
