Beko CEG7425B Manuel D'utilisation page 57

6 Cleaning and maintenance
In case of power
C
failure during the
cleaning program, it
has to be restarted.
Before running the
cleaning
C
the metal sieves in
the brewing unit
must be clean and
wiped dry.
The cleaning water is collected in
the drip tray. Alternatively, you can
place a receptacle (>350 ml) under
the spout. Only empty the recep-
tacle when the coffee machine
indicates that the drip tray must
emptied.
Fully Automatic Coffee Maker / User Manual
program,
A
To run the cleaning program proceed
as follows:
1. Press button 2 until the function
display "Cleaning program" is
selected.
2. Then press OK (button 6).
CAUTION: Damage
to the coffee machine
and remnants left in
the water by use of
the wrong cleaner!
Use only Beko cleaning
tablets. If
cleaning solutions are
used, Beko assumes
no liability for any
damage caused. Beko
cleaning tablets can
be purchased from
your retailer or from
Beko.
57 / 233 EN
other