Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Operation and use
5
1. Press the button 4 repeatedly
until the required cup symbol
for the desired ground coffee
quantity is displayed.
The cup filling level
for one cup is stored
C
during this process.
(appliance must be
set to one cup mode).
2. Place an appropriate cup under
the coffee delivery spout
(espresso cup, coffee cup or
coffee mug).
3. Press key 5 repeatedly until the
symbol for the required coffee
grinding quantity lights up.
34 / 233 EN
4
5
Fully Automatic Coffee Maker / User Manual
4. Press OK (button 6) and keep it
pressed until the desired filling
amount is reached.
5. Release the button. The new cup
filling level is now stored.
Repeat the proce-
dure if you also wish
C
to change the filling
level for the other
cup sizes.
All values remain
stored even when
the coffee machine is
switched off. Should
C
you change your cup
size, you can adapt
the cup filling level
individually at any
time.
The
filling levels for each
C
individual cup symbol
only applies in bean
mode.
6
stored
cup
Publicité
Chapitres
Table des Matières
