Beko CEG7425B Manuel D'utilisation page 71

7 Troubleshooting
Display
• If your own remedies should not be successful, please also contact the
service hotline.
Fully Automatic Coffee Maker / User Manual
Cause
• Communication
failure
•Input voltage
error
•Main switch
blocked
•Coffee
temperature is
incorrect
•Brewing
unit is blocked
(technical
reason).
Remedy
•If one of these messages
are displayed, switch the
device off. Switch back
on again after a cooling
down phase of approx. 30
minutes. If the message
is displayed again, an
error has occurred that
may need a technical
evaluation. Please contact
the service hotline. If
we cannot help you on
the telephone, you will
be instructed as to the
further procedure.
www.beko.com
Beko call center
444 0 888
• Use the splined opening on
the measuring spoon to open
the back of the brewing unit
with the splined journal (min.
3 turns).
71 / 233 EN