Air Filter - Paslode IM200Li.2 Manuel D'utilisation

Servicing

Air Filter

Open the grille by pressing slightly above the adapter and
pivoting the cover open. The air filter simply lifts out.
Tap the filter GENTLY to remove any dust. Check and clean
the air filter every two days. Soap and water restores the
filter to a "like new" condition.
End-of-Workday Routine
These simple steps are based on maintaining the safety and
operational efficiency of the Cordless 18 Ga. Brad Nailer.
Before you leave the work site:
1. Remove battery and store in tool case. Always use the
Cordless Brad Nailer case for transporting and storing
the tool.
2. Dispose of all empty fuel cells. Remember to dispose of
these cells where they will not be crushed, punctured,
burned or found by children.
16
When you get home:
1. Place the battery in its charger if it needs charging as
indicated by the red charge light on the handle.
2. Wipe your Cordless Brad Nailer with a clean, soft
cloth.
3. Remove and clean the filter every two days.
4. Check work contacting element to ensure it is operating
freely.
GRILLE
Paslode Cordless Tool Accessories
A variety of accessories are available for the Paslode
Cordless 18 ga. Brad Nailer:
FILTER
No-Mar Replacement Tip -Hard Tip Part No. 901048
No-Mar Replacement Tip -Soft Tip Part No. 901067
Battery - Part No. 902654
Clear Safety Glasses - Part No. 401382
Paslode Cordless Lubricating Oil - Part No . 401482
CAP
Paslode Cordless Tool Cleaner - Part No. 219086
Battery Charger Kit - Part No. 902667
Paslode Cordless Brad Nailer Case - Part No. 902445
Paslode Cordless Trim Tool Tune - Up Kit- Part No. 219304
Contact your Paslode
information.
Tools
A 9/64 Hex Wrench (Part No. 900736) is provided with
each Impulse 18 ga. Brad Nailer .
.
® representative for additional