Paslode Cordless18 Gauge Brad Nailer Operation; Depth Of Drive Adjustment - Paslode IM200Li.2 Manuel D'utilisation

Paslode Cordless 18 ga. Brad Nailer Operation
Operation:
The work contacting element and nose will become hot
after prolonged or rapid use. If it becomes necessary to
adjust the work contacting element, avoid touching with
bare hands.
CAUTION
This tool must be operated in a well ventilated
environment, because the tool exhausts carbon
monoxide similar to a chainsaw or lawn mower.
Exposure to carbon monoxide may cause dizziness,
nausea or unconsciousness.
PRESS WORK –
CONTACTING
ELEMENT
AGAINST THE
WORK SURFACE.
Fan motor starts,
fuel is injected into
combustion
chamber and
mixed with air by
the fan.
SQUEEZE
TRIGGER
Spark plug ignites
the fuel/air mixture
driving the piston
assembly down on
the fastener.
RELEASE
TRIGGER -
LIFT TOOL
Combustion
chamber opens.
Fan exhausts hot
gases and cools
internal
components.
DANGER

Depth of Drive Adjustment

Remove the battery before adjusting the depth of
drive.
The depth of drive adjustment is done by turning the
adjustment wheel in the direction as shown for flush or deep.
Turn
adjustment
wheel in the
direction
indicated
for Flush
or deep
13