Product Description And Intended Use; Verifying The Product's Application Limits; Product Technical Specifications; Model Type - Nice KS200 KIT Mode D'emploi

1
GENERAL WARNINGS: SAFETY - INSTALLATION - USE (original instructions in Italian)
CAUTION Important safety instructions. Observe all the instructions as improper installation may cause serious damage
CAUTION Important safety instructions. It is important to comply with these instructions to ensure personal safety. Store these
instructions
• Before commencing the installation, check the "Product technical specifications", in particular whether this product is suitable for automating your
guided part. Should it be unsuitable, DO NOT proceed with the installation
• The product cannot be used before it has been commissioned as specified in the "Testing and commissioning" chapter
CAUTION According to the most recent European legislation, the implementation of an automation system must comply with the
harmonised standards set forth in the Machinery Directive in force, which allow for declaring the presumed conformity
of the automation. On account of this, all operations regarding connection to the mains electricity, as well as product
testing, commissioning and maintenance, must be performed exclusively by a qualified and skilled technician!
• Before proceeding with the product's installation, check that all materials are in good working order and are suitable for the intended applications
• The product is not intended for use by persons (including children) with reduced physical, sensory or mental capacities, nor by anyone lacking suf-
ficient experience or familiarity with the product
• Children must not play with the appliance
• Do not allow children to play with the control devices of the product. Keep the remote controls out of reach of children
CAUTION In order to avoid any danger from inadvertent resetting of the thermal cut-off device, this appliance must not be powered through an
external switching device, such as a timer, or connected to a supply that is regularly powered or switched off by the circuit
• The manufacturer assumes no liability for damage to property, items or persons resulting from non-compliance with the assembly instructions. In
such cases the warranty does not cover material defects
• Cleaning and maintenance to be carried out by the user must not be effected by unsupervised children
• Before intervening on the system (maintenance, cleaning), always disconnect the product from the mains power supply
• The packaging materials of the product must be disposed of in compliance with local regulations
• Keep persons away from the gate when it is moved through the control elements
• When performing a manoeuvre, keep an eye on the automated mechanism and keep all bystanders at a safe distance until the movement has been
completed
• Do not operate the automation if anyone is working on it; disconnect the power supply before permitting any work to be carried out
2

PRODUCT DESCRIPTION AND INTENDED USE

CAUTION! – Any use other than that specified herein or in environmental conditions other than those stated in this manual is to be con-
sidered improper and is forbidden.
KS200KIT can be operated using a key switch with courtesy light or a release switch. When the key is turned from vertical psition about 30°, two con-
tacts are available: one in clockwise direction, and the other in the opposite direction. When the key is turned further (in either direction) the handle will
open, and the release system will function.
The maximum stroke of the cursor inside the handle is 60 mm.
3
INSTALLATION

3.1 - VERIFYING THE PRODUCT'S APPLICATION LIMITS

Before proceeding with the installation, carry out the following checks and verify the "Product technical characteristics" (Paragraph 3.2):
01. Check the overall dimensions of the KS200KIT (fig. 2).
02. Ensure that all limitations, conditions and warnings appearing in this manual can be fully observed.

3.2 - PRODUCT TECHNICAL SPECIFICATIONS

Model type

Type
Courtesy light supply
Protection class
Working temperature
Maximum contact voltage
Maximum contact current
Lock Combinations
Note: in order to improve its products, NICE S.p.A. reserves the right to modify their technical specifications at any time without prior notice. In any
case, the manufacturer guarantees their functionality and suitability for their intended use. Note: all technical specifications refer to a temperature of
20°C.
KS200KIT
Key-operated selector switch with cord-type release
Between 12V and 36Vdc, 12V and 28Vac
IP55
-20°C ... +50°C (without ice forming)
50V – V
1A
250.000
English – 5