Automatic Operation - Sharp R-291WE Mode D'emploi

AUTOMATIC OPERATION

NOTE FOR AUTOMATIC OPERATION
1. When using the automatic features, carefully follow the details provided in each MENU GUIDE to achieve the
best result. If the details are not followed carefully, the food may be overcooked or undercooked.
2. Food weighing more or less than the quantity or weight listed in each MENU GUIDE, cook manually.
3. To change the final cooking or defrosting result from the standard setting, press the Less or More key.
Refer to page GB-8.
4. The final cooking result will vary according to the food condition (e.g.initial temperature, shape, quality).
Check the food after cooking and if necessary continue cooking manually.
5. To defrost foods above or below the weights allowed on the DEFROST MENU GUIDE, use defrost manually.
ONE TOUCH REHEATING
For your convenience One touch reheating allows you to easily reheat food by automatic sensor function. Do not
cook small quantities of food or foods which do not have high water values such as bread or grilled food, with this
function.
This prevent "smoke and ignition".
Do not use Sensor Reheat key to reheat a drink, we recommend using the Beverages key instead.
To reheat a dinner plate.
1. Press the START (Sensor Reheat key once).
x1
The cooking will begin start display will show sensor cooking bar, When reheating is completed the oven will stop
display will be "0".
Cautions:
• Take out a wrap or a cover to avoid changing a shape or melt.
• Container that have a risk of damage, explosion or ignition during heat should be taken out.
(Container or bag of sauce, boiled egg, aluminium case)
• Do not use a aluminum container or a aluminium foil.
(There is a risk of sparks when heating and able to cause break down).
• Cool down a oven or tray if they are hot.
R-291(BK)WE [05 EN].indd 9 R-291(BK)WE [05 EN].indd 9
111/GB-9
3/26/2014 1:20:46 PM 3/26/2014 1:20:46 PM