Mosa GE 4500 SX Manuel D'emploi Et Entretien page 54

Masquer les pouces Voir aussi pour GE 4500 SX:
Table des Matières

Publicité

ACCESSORY USE
When the TCM 15 - 6 is used, it is not possible to connect the E.A.S automatic intervention unit.
USE OF THE REMOTE CONTROL TCM 15
The coupling of the TCM 15 with the generating set,
permits to work far from the set itself.
The remote control is connected to the front plate,
with a multiple connector.
The TCM 15 assures the following fonctions:
- starting (starting key Q1)
- stop (starting key Q1)
- choke control (L6)
USE OF THE REMOTE CONTROL TCM 6
The coupling of the TCM 6 with the generating set,
ready for remot starting, permits to work far from
the set itself.
The remote control is connected to the front plate,
and/or rear plate, with a multiple connector.
The TCM 6 assures the following fonctions:
- starting (starting key Q1)
- stop (starting key Q1)
- indication of oil low pressure (warning light O1)
To stop the set turn the key to the position "OFF".
N.B.: the position of the selector LOCAL START/
REMOTE START (l6) on the generating sets must
be on the position "REMOTE START".
MAKE SURE
!
REMOTE CONTROL
TCM 15 - 6
OFF
ON
CHOKE
START
L6
Q1
OFF
ON
START
Q1
O1
M
38.5
REV.1-07/11
TCM 15
OFF
PUSH AND
SCREW TIGHT
TCM 6
OFF
PUSH AND
SCREW TIGHT

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Ge 4500 sxe - easGe 4500 sxe - avr easGe 4500 hbsGe 4500 hbs-avrGe 3200 sx

Table des Matières