Mosa GE 4500 SX Manuel D'emploi Et Entretien page 47

ASSEMBLING KIT PS 4.5
The Kit, exhaust extension, has the aim to remove
the exaust vapours of the penerating set from the
work area; therefore we show the assembling pro-
cess for the application of the Kit PS 4.5 (cod. n°.
M306410062).
DISASSEMBLE:
a) the side cover, exhaust muffler side (where it is
assembled)
b) the exhaust complete with manifold (1) un-
screwing the nuts (2) which fix it to the engine
head.
 NB: pay attention not to damage the gasket
between the manifold and the head.
c) from the exhaust, the protection (3) and the flange
with the flame stopper (4).
ASSEMBLE:
d) the protection of the exhaust muffler (3)
e) the small trunk (5) of the Kit PS 4.5
f) the complete exhaust muffler (1) (so modified)
and the nuts (2)
g) the side cover, exhaust muffler side (where it is
assembled)
h) the tube (6) of the Kit, fixing it with the clamp (7).
GE 4500 SX
GE 4500 SXE-EAS
GE 4500 SXE-AVR EAS
 NB: it is ADVISABLE the block the tube (6) at
about 2 m from the generating set in a stiff and
sure way.
M
6.1
REV.0-12/11