Mosa GE 4500 SX Manuel D'emploi Et Entretien page 33

Quality system
UNI EN ISO 9001 : 2008
MOSA has certified its quality system according
to UNI EN ISO 9001:2008 to ensure a constant,
highquality of its products. This certification covers
thedesign, production and servicing of engine dri-
venwelders and generating sets.
The certifying institute, ICIM, which is a member
ofthe International Certification Network IQNet,
awarded the official approval to MOSA after an-
examination of its operations at the head office
andplant in Cusago (MI), Italy.
This certification is not a point of arrival but a
pledgeon the part of the entire company to maintain
a levelof quality of both its products and services
whichwill continue to satisfy the needs of its clients,
aswell as to improve the transparency and thecom-
munications regarding all the company's activesin
accordance with the official procedures and inhar-
mony with the MOSA Manual of Quality.
The advantages for MOSA clients are:
·Constant quality of products and services at thehigh
level which the client expects;
· Continuous efforts to improve the products andtheir
performance at competitive conditions;
· Competent support in the solution of problems;
· Information and training in the correct applicatio-
nand use of the products to assure the security
ofthe operator and protect the environment;
· Regular inspections by ICIM to confirm that the-
requirements of the company's quality systemand
ISO 9001 are being respected.
All these advantages are guaranteed by the CER-
TIFICATE OF QUALITY SYSTEM No.0192 issued
by ICIM S.p.A. - Milano (Italy ) - www.icim.it
M
01
REV.4-03/12