Attaching The Carrying Cord; Inserting And Changing The Batteries - Leica RANGEMASTER 2000-B Notice D'utilisation

ATTACHING THE CARRYING CORD

Feed the small loop on the carrying cord through the eyelet
(4) on the housing of the Leica Rangemaster 2000-B. Then
thread the end of the cord through the small loop and pull
tight, so that the resulting loop is securely around the eyelet
on the housing.

INSERTING AND CHANGING THE BATTERIES

The Leica Rangemaster 2000-B is powered by a 3 Volt lithi-
um round cell (e.g. Duracell DL CR2, Ucar CR2, Varta CR2, or
other CR2 types).
1. Open the cover (6) on the battery compartment (7) by
turning it anticlockwise.
2. Insert the battery so that the positive contact goes in first
(as shown by the markings in the battery compartment).
3. Close the cover again by turning it clockwise.
26