Testing The Charge Capacity Of A Rechargeable Battery - VOLTCRAFT 23 87 82 Notice D'emploi

c) Testing the Charge Capacity of a Rechargeable Battery
The 7 in 1 multimeter is also suitable for determination of a battery's charging capacity. In
this case, a drive battery must be connected to the right "OUTPUT" sockets. The charger is
connected to the left "INPUT" sockets.
Attention, important!
Only use a charger suitable for the respective drive battery. The balancer
connection of the battery (see figure 11, item 4) must be connected to the
charger's balancer connection. The balancer connection of the 7 in 1 multim-
eter is not used for this measurement.
Connection pattern for charge capacity test:
1 Battery charger
2 7 in 1 multimeter
3 Drive battery
4 Balancer connection cable
The measuring method for testing the charge capacity corresponds to that for determina-
tion of an electric drive's power data.
Figure 11
47