Troubleshooting; Technical Data; Disposal - DS Produkte CM7008T-GS Mode D'emploi

Troubleshooting

If the device is not working properly, please check whether you are able to rectify the
problem yourself fi rst.
Do not attempt to repair a defective device yourself!
Problem
The device is not
working.
The device is not
brewing coffee or
the brewing process
is very slow.
Loud pump noises
can be heard.

Technical data

Model: CM7008T-GS
Product: Z 03102
Voltage supply: 220 – 240 V~ 50 Hz
Output: 1230-1470 W
Safety class: I

Disposal

The packaging material is recyclable. Dispose of the packaging in an
environmentally-friendly manner and make it available to the collection service
for recyclable materials.
Dispose of the device in an environmentally-friendly manner. It does not belong
in the household garbage. Dispose of it at a recycling centre for old electrical and
electronic equipment.
For more information, please contact the administration in your community.
33
Potential cause/solution
• Is the mains plug properly connected with the socket?
• Is the socket defective? Try another socket.
• Check the fuse for your mains connection.
• Is the device activated? If no button is pressed for approx. 15
minutes after the last brewing process, the device will switch
to standby mode. Push any button on the control panel to
reactivate the device.
• Has the fi lter holder been correctly inserted?
• Is there enough water in the water tank or milk in the milk tank?
• There is no water in the water tank.
• No espresso powder has been added to the fi lter.
• The device must be decalcifi ed (see chapter "Care and stor-
age").
• Pump noises can be heard during the brewing process. This
is normal and does not represent a defect!
Customer service / importer:
DS Produkte GmbH
Am Heisterbusch 1
19258 Gallin
Germany
Tel.: +49 38851 314650
(Calls to German landlines are
subject to charges. The cost varies
depending on the service provider.)
All rights reserved.
EN