Chapter 9 - Maintenance - TECO 320 Manuel D'instructions

Push the DOWN button.
Floor version: the lift lowers due to its weight and the weight of the vehicle down to the
ground.
Recessed version: the lift lowers due to its own weight and the weight of the vehicle
down to the safety height of approx. 500 mm. To continue lowering to the ground, the
down button (2) must be pushed together with the final travel button (3).
Be sure the safety area is free of people and objects, then press the final travel push button.
To lower the lift in the absence of electric power, simply press the descent button.
If the lift does not lower, check if the mechanical safety devices are locked.
If the safety devices are locked, contact technical support.

CHaPTEr 9 - maiNTENaNCE

To service properly the lift, the following has to be carried out:
Use only genuine spare parts as well as equipment suitable for the work required;
Follow the scheduled maintenance and check periods shown in the manual;
Discover the reason for possible failures such as too much noise, overheating, oil blow-
by, etc.
Refer to documents supplied by the dealer to carry out maintenance:
Functional drawing of the electric and hydraulic equipment;
Exploded views with all data necessary for spare parts ordering;
List of possible faults and relevant solutions.
The lift has to be properly cleaned at least once a month. Use self-cleaning clothes.
60
8.4 Lowering
8.5 manual and emergency lowering
only trained personnel who knows how the lift works, must be
allowed to service the lift.
Before carrying out any maintenance or repair on the lift, dis-
connect the power supply, padlock the general switch and keep
the key in a safe place to prevent unauthorized persons from
switching on or operating the lift.
9.1 ordinary maintenance
The use of water or inflammable liquid is strictly forbidden.
EN - Operator's manual