Table des Matières
Publicité
10.) Backlighting:
For operation in low-light conditions, the BL (backlight) sensor activates automatically to
ensure that the screen can be read even in total darkness.
11.) Battery replacement:
To replace the batteries, release the screw under the main casing and pull the battery
compartment cover downward to remove. Observe the correct polarity when inserting
the new batteries.
Technical Specification
AC/DC Voltage
Test Range
Operation time
Response Time
Frequency Range
Continuity & Diode Test
Indication
Resistance range
Test Current
RCD trigger test
RCD fault test
Phase Testing
Phase Testing
Phase Sequence
Phase indication
Display
Tolerance
Safety & Protection
Overload Category
Compliant to standards
Protection degree
Power supply
Dimensions
Weight
Dimensions
Note: Batteries should not be disposed of as normal household waste. Take them to an
approved collection point.
12 V ÷ 690 V
Max. 30 s
<1s
0 ÷ 400 Hz
Acoustical and LCD indication
0 ÷ 2 k W ± (5% of reading +5digits)
4 m A
for tripping 30 mA RCD
Single-Pole Phase testing
Two-Pole Phase
Sequence testing
>100 V AC
3 ½ digit, LC display with backlight
12V ÷ 690V ±(2% rgd. + 4D)
CAT IV 1000 V
IEC/EN 61243-3
DIN VDE 0682-401
IEC 61010
GS38
IP65
For outdoor use:
Water jet and dust tight protection
2 x 1.5 V, Type AAA Micro
200 g
238 x 70 x 30 mm
6
MD 1100-LCD
Publicité
Table des Matières
