Equipment Specifications; Dimensions - Watts OneFlow OF1465-75H Série Manuel D'installation

Equipment Specifications

OneFlow systems are complete, self-contained, loaded with media
®
and ready to use. A simple inlet and outlet connection is all that is
required for installation. Please review operating pressures, tempera-
tures and water chemistry limitations to ensure compatiblity.
Specifications
MODEL
Inlet/Outlet 2" (50mm) Socket (plastic sweat)
Connection
Maximum Service 75 gpm (284 lpm)
Flow
Temperature 100° – 150°F (38°C – 66°C)
pH 6.5 to 8.5
Ferrous Iron (Max) 0.3 ppm
Manganese (Max) 0.05mg/l
Copper (Max) 1.3mg/l
Water Pressure (psi) 15 min, 100 max (103 kPa – 6.9 bar)
Shipping Weight 105 lbs.
Service Weight 460 lbs.

Dimensions

MODEL
a 72
b
c
d 2
g
NOTE: The tank is only partially filled with media. The tank is
much lighter than a water softener and may appear to be nearly
empty. This is normal and necessary for the Up-Flow-fluidized
bed operation of the system.
OF1465-75H
OF1465-75H
in. mm
1 ⁄ 1842
2
70 1778
14 356
1 ⁄ 64
2
12 305
Cautions!
• Do not let the system freeze. Damage to the tank may result.
• System must be operated in a vertical position. Do not lay it
down during operation. The system may be placed in any posi-
tion for shipping and installation but must be operated in the
vertical position.
• Must be used on hot water. This system is not designed for
cold (<100°F) water. For cold water operation contact your
dealer for a system designed for cold water operation.
g (clearance)
a
2
d
b
c
c