Equipment Specifications; Dimensions - Watts OneFlow OF817-8H Manuel D'installation, De Fonctionnement Et D'entretien

Hot Water System Overview

Equipment Specifications

OneFlow systems are complete, self-contained, loaded with media
®
and ready to use. A simple inlet and outlet connection is all that is
required for installation. Please review operating pressures, tempera-
tures and water chemistry limitations to ensure compatiblity.
Specifications
MODEL OF817-8H
Inlet/Outlet 1" FNPT
Connection
Maximum Service 8 gpm
Flow
Temperature 100° – 150°F (38°C – 66°C)
pH 6.5 to 8.5
Ferrous Iron, Max 0.5 ppm
Manganese 0.03mg/l
Copper 1.3mg/l
Water Pressure (psi) 15 min, 100 max
Shipping Weight 15 lbs
Service Weight 40 lbs

Dimensions

MODEL OF817-8H, OF817-12H
a 20"
b 18.6"
c 8.5"
d 1.4"
e 10"
f 2.0"
g 6"
h 4.25"
NOTE: The tank is only partially filled with media. The tank is
much lighter than a water softener and may appear to be nearly
empty. This is normal and necessary for the Upflow-fluidized bed
operation of the system.
Tank Head
Bypass Valve
(Shown in Bypass Position)
Media Tank
OF817-12H OF1019-20H
12 gpm 20 gpm
16 lbs
45 lbs
OF1019H-20H
22"
20.6"
10.5"
1.4"
11"
2.0"
6"
4.25"
Figure 1.
Cautions!
• Do not let the system freeze. Damage to the tank may result.
• System must be operated in a vertical position. Do not lay it
down during operation. The system may be placed in any posi-
tion for shipping and installation but must be operated in the
vertical position.
• Must be used on hot water. This system is not designed for
cold (<100°F) water. For cold water operation contact your
dealer for a system designed for cold water operation.
26 lbs
80 lbs
2
IN - Hot Water (100°-150°F)
OUT - OneFlow
g (clearance)
a
c
e
h
Treated Water
®
d
b
f