Environmental Information - ResMed Lumis Série Mode D'emploi

For transmitters rated at a maximum output power not listed above, the recommended separation
distance d in metres (m) can be determined using the equation applicable to the frequency of the
transmitter, where P is the maximum output power rating of the transmitter in watts (W) according
to the transmitter manufacturer.
Notes:
• At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
• These guidelines may not apply in all situations. Electromagnetic propagation is affected by
absorption and reflection from structures, objects and people.
Symbols
The following symbols may appear on the product or packaging.
Read instructions before use.
use. Manufacturer.
Catalogue number.
Protected against finger sized objects and against dripping water when tilted up to 15 degrees
from specified orientation.
equipment. Humidity limitation.
China pollution control logo 1.
(In the US, Federal law restricts these devices to sale by or on the order of a physician).
Maximum water level.
Atmospheric pressure limitation.
MR unsafe (do not use in the vicinity of an MRI device).
(Low SpO alarm is not available).
2
See symbols glossary at ResMed.com/symbols.

Environmental information

This device should be disposed of separately, not as unsorted municipal waste. To dispose of your
device, you should use appropriate collection, reuse and recycling systems available in your region.
The use of these collection, reuse and recycling systems is designed to reduce pressure on natural
resources and prevent hazardous substances from damaging the environment.
If you need information on these disposal systems, please contact your local waste administration.
The crossed-bin symbol invites you to use these disposal systems. If you require information on
collection and disposal of your ResMed device please contact your ResMed office, local distributor
or go to www.resmed.com/environment.
Servicing
The Lumis device is intended to provide safe and reliable operation when operated in accordance
with the instructions provided by ResMed. ResMed recommends that the Lumis device be
inspected and serviced by an authorised ResMed Service Centre if there is any sign of wear or
concern with device function. Otherwise, service and inspection of the products generally should
not be required during their design life.
26
Indicates a warning or caution.
European Authorised Representative.
Serial number.
Direct current.
Temperature limitation.
China pollution control logo 2.
Use distilled water only.
Complies with RTCA DO-160 section 21, category M.
Importer.
Device number.
Type BF applied part.
Non-ionising radiation.
Date of manufacture.
Medical device.
Follow instructions before
Batch code.
On / Off. Device weight.
Class II
Prescription only
Operating altitude.
Alarm inhibit