SICK LCU-P Guide D'utilisation page 357

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 189
Operating instructions
LCU-P
Code Fault Message
134
LOCKOUT: 134
CHANGE CONTROLBOARD
1 3 5 LOCKOUT: 135
CHANGE CONTROLBOARD
136
LOCKOUT: 136
CHANGE CONTROLBOARD
137
LOCKOUT: 137
CHANGE CONTROLBOARD
138
LOCKOUT: 138
CHANGE CONTROLBOARD
139
LOCKOUT: 139
CHANGE CONTROLBOARD
140
LOCKOUT: 140
CHANGE CONTROLBOARD
141
LOCKOUT: 141
CHANGE CONTROLBOARD
142
LOCKOUT: 142
CHANGE CONTROLBOARD
143
LOCKOUT: 143
CHANGE CONTROLBOARD
144
LOCKOUT: 144
CHANGE CONTROLBOARD
145
LOCKOUT: 145
CHANGE CONTROLBOARD
146
LOCKOUT: 146
CHANGE CONTROLBOARD
147
LOCKOUT: 147
CHANGE CONTROLBOARD
148
LOCKOUT: 148
CHANGE CONTROLBOARD
149
LOCKOUT: 149
CHANGE CONTROLBOARD
150
LOCKOUT: 150
CHANGE CONTROLBOARD
1 5 1 LOCKOUT: 151
CHANGE CONTROLBOARD
1 5 2 LOCKOUT: 152
CHANGE CONTROLBOARD input testing fail).
1 5 3 LOCKOUT: 153
CHANGE CONTROLBOARD OSSD input testing fail).
8 008 364/NB 86/25-04-00 © SICK AG • Safety Systems • Germany • All rights reserved
Diagnostic Messages
Fault Description
Safety channels do not have the same configuration
information.
Code sequencing error – invalid parameter value.
Safety related RAM comparison failure.
Channel sequence pulse was occuring too rapidly,
the other channel was reset.
Channel sequence pulse did not occur in the correct
time frame, the other channel was reset.
The background tests were not all executed in one hour.
One safety channel has activated more than 1 test
signal.
The CRC of the operating history data in the
NVRAM is not correct.
Mode select 2 hardware failure.
External restart input hardware failure.
Auxiliary input A2 hardware failure.
Auxiliary input B2 hardware failure.
Primary AOPD OSSD 2 is stuck high.
Secondary AOPD OSSD 2 is stuck high.
Timer 0 is not operating at the proper sequence.
The channel's address appeared as a source address
in a received message packet.
Channel synchronization using comunications has failed.
A safety channel is unable to write to static RAM
P1 or P2 test line is stuck high (internal primary OSSD
S1 or S2 test line is stuck high (internal secondary
GB
Chapter 10
357

Publicité

Table des Matières
loading

Table des Matières