Using Your Ceiling Fan - Emerson CARRERA CF784BS01 Manuel Du Propriétaire

6.1
Restore electrical power to the outlet box by turning the
electricity on at the main fuse box.
All fans are shipped from the factory with the reversing
switch positioned to the "left" circulate air downward.
If airflow is desired in opposite direction, turn your fan OFF
and wait for the blades to stop turning, then slide the
reversing switch to the "right" position, and turn fan on
again (Figure 27).
The fan blades will turn in the opposite direction and
reverse the airflow.
Reverse Switch Information
Season Rotation Direction
Summer Counter-Clockwise
Winter Clockwise
WARNING
!
To reduce the risk of fire or electrical shock, do not use
this fan with any solid-state speed control device.
6.2
Check the operation of the fan by gently pulling on the pull
chain switch.
Cut the 3-speed switch pull chain to a desired length
(optional). Connect the die-cast pendant (supplied) to the
3-speed switch pull chain by sliding the die-cast pendant
(small hole first)
(Figure 28). Attach the chain coupler to the end of the
chain and allow the die-cast pendant to fall down over the
couplers.
Your fan model is equipped with a 4-position,
3-speed pull chain switch (Figure 28). The operating
sequence is as follows:
Three-Speed
1st Pull—HIGH
2nd Pull—Medium
3rd Pull—Low
4th Pull—OFF

6. Using Your Ceiling Fan

Switch Position
Left
Right
onto the pull chain
REVERSE
SWITCH
Figure 27
3-SPEED SWITCH
PULL CHAIN
Figure 28
16
SWITCH HOUSING
ASSEMBLY
SWITCH HOUSING
ASSEMBLY
DIE-CAST PENDANT
CHAIN COUPLER
U.L. Model No.: CF784-1