Optional Al200 Accent Light Installation - Luminance Brands kathy ireland HOME PREMIUM SELECT ECO CF4802AP00 Mode D'emploi

10. Optional AL200 Accent Light Installation

10.1
CAUTION
!
To reduce the risk of electric shock, disconnect the
electrical supply circuit to the fan before installing
light kit assembly.
Position the LED Accent Light Fixture so that the
Downrod passes through the opening of the LED
Accent Light Fixture .
Align the LED Accent Light Fixture Female 2-Pin
Connector with the Motor Housing Assembly Male 2-Pin
Connector (Figure 38) .
10.2
Align the Mounting Holes of the LED Accent Light
Fixture and the Motor Housing Assembly (Figure 39) .
NOTE: Be sure the LED Accent Light Fixture
Connector is located close to the Motor Housing
Assembly Connector for ease of installation.
Install the LED Accent Light Fixture to the Motor
Housing Assembly using three #8-32 Pan Head Screws
(supplied) (Figure 39) .
WARNING
!
To avoid possible fire or electric shock, be careful
not to pinch wires under the LED Accent Light Fixture
during assembly.
10.3
Securely engage the LED Accent Light Fixture Female
2-Pin Connector to the Motor Housing Assembly Male
2-Pin Connector (Figure 40) .
For storage of excess Connector Wire, tuck the
Connector Wire along inside edge of the LED Accent
Light Fixture (Figure 40) .
LED ACCENT
LIGHT FIXTURE
LIGHT FIXTURE
FEMALE 2-PIN
CONNECTOR
MOTOR
HOUSING
ASSEMBLY
MALE 2-PIN
CONNECTOR
MOTOR
HOUSING
ASSEMBLY
Figure 38
#8-32 PAN HEAD
SCREWS (3)
LIGHT FIXTURE
MOUNTING
HOLES (3)
MOTOR
HOUSING
ASSEMBLY
HOLES (3)
Figure 39
CONNECTOR
WIRE STORAGE
Figure 40
25
MOTOR HOUSING ASSEMBLY
MALE 2-PIN CONNECTOR
LIGHT FIXTURE
FEMALE 2-PIN
CONNECTOR
luminancebrands.com
Please contact 1-800-777-4440 for further assistance
U.L. Model No.: CF4802 and CF4502