Optional Al200 Accent Light Installation - Luminance Brands kathy ireland Home CF5200AP00 Mode D'emploi

10. Optional AL200 Accent Light Installation

10.1
CAUTION
!
To reduce the risk of electric shock, disconnect the
electrical supply circuit to the fan before installing
light kit assembly.
Position the LED Accent Light Fixture so that the
Downrod passes through the opening of the LED
Accent Light Fixture .
Align the LED Accent Light Fixture Female 2-Pin
Connector with the Motor Housing Assembly Male 2-Pin
Connector (Figure 32) .
10.2
Align the Mounting Holes of the LED Accent Light
Fixture and the Motor Housing Assembly (Figure 33) .
NOTE: Be sure the LED Accent Light Fixture
Connector is located close to the Motor Housing
Assembly Connector for ease of installation.
Install the LED Accent Light Fixture to the Motor
Housing Assembly using three #8-32 Pan Head Screws
(supplied) (Figure 33) .
WARNING
!
To avoid possible fire or electric shock, be careful
not to pinch wires under the LED Accent Light Fixture
during assembly.
10.3
Securely engage the LED Accent Light Fixture Female
2-Pin Connector to the Motor Housing Assembly Male
2-Pin Connector (Figure 34) .
For storage of excess Connector Wire, tuck the
Connector Wire along inside edge of the LED Accent
Light Fixture (Figure 34) .
LED ACCENT
LIGHT FIXTURE
LIGHT FIXTURE
FEMALE 2-PIN
CONNECTOR
MOTOR
HOUSING
ASSEMBLY
MALE 2-PIN
CONNECTOR
MOTOR
HOUSING
ASSEMBLY
Figure 32
#8-32 PAN HEAD
SCREWS (3)
LED ACCENT
LIGHT FIXTURE
MOUNTING
HOLES (3)
MOTOR
HOUSING
ASSEMBLY
HOLES (3)
Figure 33
CONNECTOR
WIRE
STORAGE
Figure 34
24
LIGHT FIXTURE FEMALE
2-PIN CONNECTOR
MOTOR HOUSING
ASSEMBLY MALE
2-PIN CONNECTOR
ETL Model No.: CF5200