Luminance Brands kathy ireland HOME PREMIUM SELECT ECO CF4802AP00 Mode D'emploi page 6

3. Ceiling Fan Assembly
3.2
Use the 10 Round Recessed Holes in the Motor
Hub marked with "5" to install the Five Flange/Blade
Assemblies in accordance with Step 3 .3 (Figure 2) .
3.3
NOTE: Take care not to scratch fan housing when
installing blades.
Attach One Flange/Blade Assembly to the Motor Hub
using Two 10-32 x 18mm Oval Head Screws (supplied)
(Figure 3) . Do NOT Tighten completely at this time .
Install the Remaining Flange/Blade Assemblies in the
same way .
Gently Snug all 10-32 x 18mm Oval Head Screws to
the Motor Hub, working around the Hub in a Clockwise
sequence .
Next, Securely Tighten all 10-32 x 18mm Oval Head
Screws again, working in a Clockwise sequence .
NOTE: Failure to follow this procedure could result
in fan wobble.
This completes the Blade installation .
WARNING
!
To reduce the risk of personal injury, do not bend
the blades during installation, balancing the blades
or cleaning the fan. Do not insert foreign objects in
between rotating fan blades.
(Continued)
Figure 2
Figure 3
6
10 RECESSED HOLES
MARKED "5"
RUBBER
MOTOR HUB
10-32 x 18mm OVAL HEAD
SCREWS (2 per flange)
RUBBER
FLANGE
MOTOR HUB
U.L. Model No.: CF4802 and CF4502