Roadstar HIF-1996D+BT Manuel D'instructions page 9

FM MENU
Press MENU (13) (17 on remote) to access to the options.
Scan Setting: select this option to choose between scanning all stations or only the strong

stations.
Audio Setting: select this option to choose between forcing mono audio or allowing stereo

sound.
FM PRESET
See DAB PRESET instructions.
FM INFO
Repeatedly press INFO (12) (18 on remote) to see the following informations: KIND OF PRO-
GRAM / FREQUENCE / AUDIO / DATE / TIME.
LISTENING TO TAPE
1. Press MODE (8) (5 on remote) repeatedly to select TAPE mode.
2. Load a cassette tape into the unit. The system will start playback automatically after in-
serting the cassette tape.
3. Press FFD/EJ (27) half inwards during playback mode. The tape will wind forward.
Slightly press FFD/EJ (27) again to resume playback.
4. Press FFD/EJ (27) completely inwards and the cassette tape will be ejected through the
CASSETTE MECHANISM (26).
PLAYING COMPACT DISC
1. Press MODE (8) (5 on remote) repeatedly to select CD mode.
2. Press CD DOOR OPEN/CLOSE BUTTON (19) (2 on remote) to open the cd door. Place
a cd with the printed side facing up inside the tray, then close the cd door. The first track
will start playback.
Press SKIP -/+ (16/17) (12/13 on remote) to select your favorite tunes. If you hold SKIP -/+

(16/17) (10/11 on remote), the playing track will go fast backward or forward until you relea-
se the button.
Press PLAY/PAUSE (14) (9 on remote) to pause the playback. The track number will start

blinking. Press PLAY/PAUSE (14) (9 on remote) again to resume the playback.
Press STOP (15) (6 on remote) to stop the playback.

REPEAT MODE
During playback, repeatedly press (7) on remote on the remote control to select:
Repeat1: The current track is played repeatedly.

RepeatFolder: The current folder is played repeatedly.

RepeatAll: All tracks are played repeatedly.

CD PROGRAMMING
You can program up to 99 tracks to play in any desired order.
1. Insert a disc and press STOP (15) (6 on remote) when it starts playing.
2. Press (8) on remote. "P01" will be shown on the display.
3. Press SKIP -/+ (16/17) (12/13 on remote) to select your favorite tunes.
4. Press (8) on remote to store the track in the program memory. "P02" will be shown on the
display.
5. Repeat steps 3-4 to select and store all desired tracks.
6. Press PLAY/PAUSE (14) (9 on remote) to start program play.
7. Press STOP (15) (6 on remote) once to stop the program play. Press STOP (15) (6 on
remote) twice to clear programme.
English 4