Aux In Operation; Usb Operation; Bluetooth Operation - Roadstar HIF-8892EBT Manuel D'instructions

AUX IN OPERATION

1. Select "AUX" mode by pressing the [MODE] button (2) repeatedly;
2. Use one male to male 3.5mm jack cable (not included) to connect any external
audio device to the
Note: Music control (play, pause, etc) must be done from your external device.

USB OPERATION

1. Select "USB" mode by pressing the [MODE] button (2) repeatedly;
2. Plug an USB stick into the
3. Playback will start automatically from the first track.
Note: Some mp3 player may not be able to play via the usb socket. this is not a mal-
function of the system.
Note: To avoid damage to USB memory, remove it only when the radio is OFF.
SD OPERATION
1. Select "SD" mode by pressing the [MODE] button (2) repeatedly;
2. Plug a SD card into the
3. Playback will start automatically from the first track.
Note: To avoid damage to the memory, remove it only when the radio is OFF.

BLUETOOTH OPERATION

1. Select "BT" mode by pressing the [MODE] button (2) repeatedly;
2. Connect your Bluetooth portable device to the ID Bluetooth tagged as "HIF-
8892EBT";
3. You can now transfer the music to the
Note: Music control (play, pause, etc) must be done from your external device.
REPEAT - RANDOM MODE
During playback, press repeatedly the [PLAY MODE] (16) to select:
REP-ONE: The current track is played repeatedly.

REP-FOLDER: The current folder is played repeatedly.

REP-ALL: All tracks are played repeatedly.

RANDOM: Tracks are played randomly.

INTRO: All tracks are played for 10 seconds.

[AUX-IN SOCKET]
[USB PORT]
[SD PORT] (4);
English
(5).
(3);
HIF-8892EBT.
6