Télécharger Imprimer la page

Led Functioning; Indications For Battery - spanesi TOUCH PORTABLE Manuel D'utilisation

Publicité

Les langues disponibles
  • FR

Les langues disponibles

8.4 LED FUNCTIONING

The communication interface's Led of the PC/Touch have
the following functionality:
YELLOW LEDS: If the small 5 Leds (1 on the base
of the arm and 4 under the second part of the arm)
of the TOUCH arm are lit up and they don't flash, it
means that the TOUCH is correctly supplied and the
program of measure is not activated. If the Led flash,
it means that the program of measure communicates
with the arm TOUCH. If instead the Led don't start, it
means that the TOUCH arm is not correctly supplied.
It's better to verify all the connections and verify that
the Led introduced in the communication interface
PC/TOUCH work correctly.
GREEN LED: If the LED is lit up the arm is on.
RED LED: when the red LED is flashing the battery
is charging. When the LED is steady that means it is
fully charged.
BLUE LED: it flashes if the arm communicates with
TOUCH / A03
the Test Touch program or with the Touch software.
8.4
LED FUNCTIONING:
Fig. 7

Indications For Battery

When the charger is not connected the battery it will last
for approximately 8 hours. Whenever the Touch Arm is
The communication interface's Led of the PC/Touch have the following functionality:
plugged into 110 volts the battery status is verified and,
Yellow LEDS: If the small 5 Leds (1 on the base of the arm and 4 under the second part of the arm) of the TOUCH arm are lit up and
if necessary, automatically recharged. The Touch is
they don't flash, it means that the TOUCH is correctly supplied and the program of measure is not activated. If the Led flash, it means
equipped with a battery safeguard that stops the recharge
that the program of measure communicates with the arm TOUCH. If instead the Led don't start, it means that the TOUCH arm is not
of the battery at its maximum charge level. For a complete
correctly supplied. It's better to verify all the connections and verify that the Led introduced in the communication interface PC/TOUCH
work correctly.
charge of the battery it is necessary that the Touch remains
connected to 110 volts for at least 10 hours.
Green LED: If the LED is lit up the arm is on
Red LED: when the red LED is flashing the battery is charging. When the LED is steady that means it is fully charged
Blue LED: it flashes if the arm communicates with the Test Touch program or with the Touch software.
Indications For Battery
When the charger is not connected the battery it will last for approximately 8 hours. Whenever the Touch Arm is plugged into 110 volts
the battery status is verified and, if necessary, automatically recharged. The Touch is equipped with a battery safeguard that stops the
recharge of the battery at its maximum charge level. For a complete charge of the battery it is necessary that the Touch remains
connected to 110 volts for at least 10 hours.
DC001630
Pag. 24 di 28
35

Publicité

loading

Ce manuel est également adapté pour:

Touch bike