Connecting And Disconnecting The Headset Plug - Panasonic WX-CT420 Mode D'emploi

Connecting and disconnecting the headset plug

Turn off the Belt Pack.
Important
Be absolutely sure to turn off the Belt Pack before
connecting or disconnecting the headset plug. Otherwise
the Belt Pack may malfunction.
When connecting the headset plug to this
product, hold the plug and push it straight
into the earphone output jack and microphone
input jack.
When disconnecting the headset plug from
this product, hold the plug and pull it straight
out.
Caution
Do not under any circumstances take hold of the cable and pull it free, pull the plug part out at a diagonal angle or use any
other unreasonable means to disconnect it. Doing so may cause the plug, connector area, and other parts to malfunction.
Do not hold the cable. Do not pull this part up and down.
11