Regulatory Compliance; Recycling Instructions - Bertrand Puma HYDRAULIQUE D 20 Notice D'instructions

Instruction manual for D20 hydraulic divider
6.3 ADDRESS FOR MAINTENANCE:
We advise you to first enquire with the seller of the
equipment.
The manufacturer reserves the right to modify or
improve its products without notice.
For information and ordering spare parts, please specify
the machine type, the serial number, the electrical
characteristics and the names, codes and numbers of the
spare parts as shown in the exploded view.

7 Regulatory compliance________________________________

•
The device is designed and produced in
accordance with:
- The machinery
17/05/2006
- Directive 2004/108/EC
- EC regulation 1935/2004 of 27 October 2004
•
This conformity is certified by:
- The CE mark of conformity, fixed on the machine
- The corresponding CE conformity declaration
associated with the guarantee certificate
- This instruction manual which must be given to
the operator.
•
Acoustic characteristics:
- The level of sound pressure measured according
to the test code PREN 454 is lower than 70dBA.

8 Recycling instructions________________________________

• Packaging:
- The divider is delivered in packaging which
protects it from damage during transport.
- The wooden pallet and the bracings can be reused
for moving the machine to another site. Store them
separately.
- Packing materials are raw materials and therefore
recyclable. If they are not retained, please recycle
these materials.
Directive 2006/42/EC
• Protection ratings as per the EN 60529-2000
standard:
- Electrical controls: IP 55
- Overall machine: IP 34
of
•
Integrated safety:
- The machine has been designed and
manufactured
regulations and standards stated above
- The operator must have received previous
training in the use of the device and be
informed of the possible residual risks
(obligation of personnel training at the work
station, French law no. 91-1414 Articles
L.231-3-2 and R.231-36)
•
Food hygiene:
The device
conforming
standards:
- Directive 89/109/EC: Materials and objects
in contact with foodstuffs
- Directive 2002/72/EC: Plastic materials in
contact with foodstuffs
Food zone surfaces are smooth and easy to clean.
Use food grade detergents and comply with their
directions for use.
- For more information about recycling, please
contact your local authority who will
- be able to inform you about the location and
opening hours of waste collection centres
• Mechanical parts:
- For protection of the environment, any worn-out
or broken mechanical parts must be recycled
9/18
Seller's company stamp
Date of purchase:
in compliance
is constructed with
to the following regulations
ref 51216681 - rev 1 - 17.07.12 - ENGLISH
with the
materials
&