Playing Back Messages - Siemens Gigaset C590 Manuel De L'utilisateur

Operating the answering machine on the Gigaset C595 base
After recording, the announcement plays
back for you to check. You can re-record the
announcement with
Please note:
u
Recording ends automatically if the max-
imum recording time of 100 seconds is
exceeded or there is a break in speech for
more than 2 seconds.
u
If you cancel the recording, the pre-
recorded announcement is used again.
u
If the answering machine's memory is
full, it switches to Answer only mode.
¤
Delete old messages and the answer-
ing machine automatically switches
back to Answer & Record mode.
Repeat the recording if required.
•
Playing back announcements/
advisory messages
¢ ¢
v Ì
Announcements
¢
Play Announcement / Play Advisory
Msg.
If you have not recorded a personal
announcement, the relevant pre-recorded
announcement plays.
Record a new announcement while playing
back the announcement:
§New§
Press the display key.
If the answering machine's memory is full, it
switches to Answer only mode.
¤
Delete old messages and the answering
machine will automatically switches back
to Answer & Record mode. Repeat the
recording if required.
•
Deleting announcements/
advisory messages
¢ ¢
v Ì
Announcements
¢
Del. Announcement / Del. Advisory
Msg.
§Yes§
Press the display key to confirm
the prompt.
36
§New§
.
After deleting your announcement, the rele-
vant pre-recorded announcement is used
again.

Playing back messages

The date and time of each message is logged
(if this function has been set,
and displayed during the playback. If Calling
Line Identification (CID) activates, the caller's
number or name displays. If the caller's
number is saved in the directory, the caller's
name is displayed.
Playing back new messages
New messages that have not yet been heard
are indicated in the display with a symbol
and number:
Ã
02
The f key on the handset and the display
on the base flashes. The number of new
messages is shown on the base.
f
Press the message key.
Ans. Machine:
Select and press
If there are new messages, playback then
begins with the first new message. After the
last new message plays you will hear the end
tone and an announcement about how
much recording time remains.
If the message was saved with the date and
time, you will hear an appropriate
announcement before playback begins.
Playing back old messages
You can listen to old messages if there are no
more new messages. Begin playback as
described under "Playing back new mes-
sages".
After the entry time and date have been
played back (after approx. 3 seconds) a new
message assumes the state "old".
¢
page 15)
§OK§
.