Decommissioning, Disposal; Decommissioning And Storage; Final Decommissioning Or Disposal - Pfannenberg EB 210 Mode D'emploi

EN
NOTICE
Safety discharge valve
It is necessary to replace safety discharge valve after it has triggered. The safety discharge valve is no longer
covered by the warranty after the first activation.

10. Decommissioning, disposal

10.1
WARNING
Danger of injury due to materials and substances
Improper work on the unit or opening of the refrigerant circuit can be damaging to health.
Always ensure that the unit is de-energized before working on the unit.
The unit must only be disposed of by qualified personnel and in accordance with applicable environmental
regulations.
If the unit is no longer needed for a longer period, it must be disconnected from the voltage supply.
 Ensure that improper start-up by third parties is not possible.
10.2
WARNING
Danger of accidents due to the heavy weight of the units
Uncontrolled movements of the unit during decommissioning can cause accidents.
Use suitable lifting equipment and secure unit to prevent accidents.
Also, secure assembled components.
CAUTION
Danger of injury due to sharp edges
For manufacturing reasons, the metal edges of the unit may have burrs.
Wear gloves during service and assembly work.
If units are to be definitively decommissioned or disposed of, the following must be observed:
Applicable statutory regulations of the user country and environmental protection regulations must be observed.
Refrigerant must be professionally extracted from the refrigerant system. Avoid refrigerant emissions.
The unit must only be disposed of by authorized, qualified personnel.
Waste equipment must also be disposed of correctly by Pfannenberg. Freight charges for delivery to one of our
manufacturing facilities must be pre-paid.
Operating and Maintenance Instructions - Chiller - Series EB 210 - EB 440

Decommissioning and storage

Final decommissioning or disposal

© Pfannenberg GmbH Page 94 / 293