Interrupting Operation; Turn Off The Appliance - Kärcher HD 2.3/15 C Ed Mode D'emploi

Release the trigger gun. To do so,

push the safety catch towards the
back.
Open the hand spray gun.

Set the working pressure and quan-

tity by turning the pressure/ quantity
regulation mechanism at the pump
unit.
Select spray type
Close the hand spray gun.

Turn the casing of the nozzle till the

desired symbol matches the mark-
ing.
High pressure circular
spray (0°) for specially
stubborn dirt
Flat low pressure spray
(CHEM) for operating us-
ing detergents or cleaning
at low pressure.
High pressure flat spray
(25°) for large dirt areas
Operation with detergent
WARNING
Unsuitable detergents can cause dam-
age to the appliance and to the object
to be cleaned. Use only those deter-
gents that have been approved by
Kärcher. Observe the dosage and oth-
er instructions provided with these de-
tergents. For considerate treatment of
the environment use detergent eco-
nomically.
Follow the safety instructions for using
detergents.
Kärcher detergents ensure smooth
functioning. Please consult us or ask
for our catalogue or our detergent in-
formation sheets.
Take out detergent suck hose.

10
Suspend end of suction hose in a

container filled with detergent.
Set nozzle to "CHEM".

Set dosing value for detergent to

the desired concentration.
Recommended cleaning method
Spray the detergent sparingly on

the dry surface and allow it to react,
but not to dry.
Spray off loosened dirt with the

high-pressure ray.
After operations, dip the filter in

clear water. Turn the dosing valve
to the highest detergent concentra-
tion. Start the appliance and rinse
for one minute.

Interrupting operation

Close the hand spray gun.

The appliance switches off.
Secure the trigger gun. To do so,

push the safety catch towards the
front.
After the interruption:
Release the trigger gun. To do so,

push the safety catch towards the
back.
Open the hand spray gun.

The appliance will switch on again.

Turn off the appliance

Shut off water supply.

Open the hand spray gun.

Switch on the pump with the power

switch and allow to run for about 5-
10 seconds.
Close the hand spray gun.

Set the appliance switch to "0/

OFF".
Pull main plug out of socket with dry

hands only.
Remove water connection.

Activate hand spray gun until de-

vice is pressure less.
– 8
EN