Zehnder Nova NEO Mode D'emploi page 4

GB
General
Your appliance is a central heating radiator with a built-in forced convection
function. When this function is activated, this quiet, compact and easy-to-use
appliance provides additional airflow to maximise heat output.
Your radiator is equipped with a number of three-speed fans to boost heat
output. The control panel is used to operate the fans only. It does not control
the independent water circuit within the radiator; this is managed by the
water supply device.
The radiator has two operating modes: Heat Mode, for which a low-tem-
perature water supply can be used, or Refresh Mode, which requires a
source of cold water. In this case, you must ensure that your cold water
supply is at a sufficient temperature to avoid water condensation on the
surface of the radiator (see section 2.3).
4