Monogram ZEU30 Manuel Du Propriétaire page 15

Multiple Timer Mode
Timers
For more information see Custom Settings,
Timer Mode section for Multi-Timer feature. Each
burner can be linked to a timer. Burner must be
on to set the timer. When more than one burner
is on, the order of the timer is from left to right.
To Turn ON Multiple Timers
1. Touch the Timer Select pad. The
Hot Light A hot surface indicator light (one for each
cooking element) will glow when the glass
Indicator
surface is hot and will remain on until the
surface has cooled to a temperature that is
safe to touch.
49-80762-1
corresponding burner power level and the
display will blink. Touch the
adjust time. Timer automatically starts after
3 seconds if there is no further action. The
"ON" LED will light when timer is on.
Burner
Power Level
Using Your Cooktop
2. To set timer for the next burner, touch the
Timer Select pad. The corresponding burner
power level and the display will blink. Touch
the
automatically starts after 3 seconds if there
is no further action. The "ON" LED will light
when timer is on. Repeat the steps for the
remaining timers.
To Turn ON Multiple Timers
or V arrows to
Hold Timer Select pad for 3 seconds to cancel
timer. The corresponding burner power level and
display will blink. When the burner times out, the
corresponding timer also times out.
Radiant Cooktop
or V arrows to adjust time. Timer
Display
Hot Surface Indicator Light
15