Monogram ZEU30 Manuel Du Propriétaire page 12

Element Surface elements will cycle on and off
to maintain the temperature you have
Cycling
selected. All radiant surface elements have
a temperature limiter that protects the glass
cooktop from getting too hot, this is normal.
The temperature limiter may cycle the
elements off more frequently if:
Operating Turn Burner(s) On: Touch and hold On/Off pad
about half a second. A chime can be heard
The Cooking
with each touch to any pad.
Elements
Power level can be selected in any of the
following ways:
1. Swipe the gray arc (on the graphics) to the
2. Touch Anywhere along the gray arc, or;
3. Touch + or - pads to adjust power level, or;
4. Shortcut to Hi: Immediately after turning unit
5. Shortcut to Low: Immediately after turning
Adjust The burner ring size is adjustable on some
elements. The ring size can be selected by
Burner Size
pressing the burner ring graphic.
12
desired power level. There is no sensor on
the LEDs, or;
on, touch the + pad, or;
unit on, touch the - pad.
Using Your Cooktop
Radiant Cooktop
• The pan boils dry.
• The pan bottom is not flat.
• The pan is off-center.
• There is no pan on the element.
LED Gray Arc Swipe Area
Lights
Single Surface Dual Surface
Element Element
Gray Arc
Swipe Area
Tri-Ring Surface
Element
49-80762-1