Aqua Medic reefdoser EVO 4 Mode D'emploi page 7

7. Changing the pump head
Beforehand, please pull the plug so that no dosage takes place during the change.
The pump head including wheels and tube is available as a spare part. To change the pump head, the two side
clips must be compressed in order to separate the head from the screwed on white base. Maybe, you have to
use a small screwdriver between the base plate and bottom plate of the pump head and lift the head slightly.
When fitting the new head, make sure that the axle is placed exactly between the three wheels. It must be
centered in front, visible in the opening.
8. Technical data power plug
Input: 100 - 240 V AC / 50 - 60 Hz
Output: 12 V DC 2.0 A
Available spare parts: Please refer to www.aqua-medic.de.
9. Warranty
Should any defect in materials or workmanship be found within 24 months of the date of purchase AB Aqua
Medic undertakes to repair, or at our option replace, the defective part free of charge – always provided the
product has been installed correctly, is used for the purpose that was intended by us, is used in accordance with
the operating instructions and is returned to us carriage paid. Proof of Purchase is required by presentation of
the original invoice or receipt indicating the dealer's name, the model number and date of purchase. This
warranty may not apply if any model or production number has been altered, deleted or removed, unauthorised
persons or organisations have executed repairs, modifications or alterations, or damage is caused by accident,
misuse or neglect. Please note that the product is not defective under the terms of this Warranty where the
product, or any of its component parts, was not originally designed and / or manufactured for the market in
which it is used. These statements do not affect your statutory rights as a customer.
AB Aqua Medic GmbH - Gewerbepark 24 - 49143 Bissendorf/Germany
- Technical changes reserved - 11/2018
7