installation
EN
note:
The appliance tabs come bent. You must bend the tab fl at by hand when fully recessing the appliance into the
wall (Fig. 4).
3.4.1 installing the appliance into a mantel
A.
Remove the glass front (see "front glass removal" section).
B.
Install the rubber feet onto the bottom of the appliance for stability (see "rubber feet installation" section).
C.
Install the top and bottom brackets provided.
D.
Insert the appliance into the mantel and secure it with the brackets (or see "electric appliance mantel"
installation manual for proper appliance installation instructions.
E.
Place the crystal embers along the media tray (see "crystal ember installation").
F.
Reinstall the glass front.
14
W415-1542 / G / 02.07.20
Fig. 3
Fig. 4