Installing The Appliance Onto The Wall - Napoleon Allure Serie Manuel D'installation Et D'utilisation

3.3

installing the appliance onto the wall

Due to the many different materials used on different walls, it is highly
recommended that you consult your local builder before you install this
appliance on the wall.
A.
Select a location that is not prone to moisture and is located at least
36" (91.4cm) away from combustible materials such as curtain drapes,
furniture, bedding, paper, etc.
B.
Have 2 people hold the appliance against the wall to determine the fi nal
location.
C.
Place appliance face down on a soft, non abrasive surface. Remove
the bracket from the back of the appliance by removing the screws
(see illustrations below)
D.
Mark out location, then mount the bracket(s) onto the wall using screws (supplied). This bracket MUST
have the hooks facing upward and be level.
note:
It is strongly recommended that the mounting bracket be screwed into the wall studs where possible. If
the wall studs cannot be used, ensure that the supplied plastic anchors are used to affi x the bracket to
the wall and the bracket is adequately secured.
E.
With the wall mounting
bracket installed, have 2
people lift the appliance
up and insert the 2 hooks
on the bracket into the 2
slots on the back of the
appliance.
F.
Check the appliance for stability ensuring that the bracket will not pull free from the wall.
HOOK
BRACKET
NEFL32/42/50FH BRACKET ILLUSTRATED
NEFL60/72/100FH BRACKET ILLUSTRATED
installation
GLASS FRONT
SIDE VIEW
FLOOR
SCREWS
W415-1542 / G / 02.07.20
EN
BODY
21 5/8"
55cm
HOOK
11