NOTE: The appliance tabs come bent. You must bend the tab flat by hand when fully recessing the
appliance into the wall, Figure 4.
FIG. 4
3.4
MANTEL INSTALLATION
3.4.1 INSTALLING THE APPLIANCE INTO A MANTEL
Remove the mesh trim front, refer to "MESH TRIM FRONT REMOVAL " section for removal
A.
instructions.
Install the rubber feet onto the bottom of the appliance for stability, refer to "RUBBER FEET
B.
INSTALLATION" section for instructions.
Install the top and bottom brackets provided.
C.
Insert the appliance into the mantel and secure it with the brackets or refer to "ELECTRIC
D.
FIREPLACE MANTEL" installation manual for proper appliance installation instructions.
Place the crystal embers along the media tray, refer to "CRYSTAL EMBER INSTALLATION" section.
E.
Reinstall the mesh trim front.
F.
13
EN
W415-2172 / 08.08.16