3.4.2 rubber feet installation
A.
Place the appliance face down on a soft surface.
B.
Using a screw driver, remove the screws on the bottom of the appliance.
C.
Install the 4 rubber feet (6 rubber feet for NEFL60/72/100FH) onto the bottom of the appliance using
the screws from Step B. See illustrations below.
note:
The screws for installing the rubber feet are secured to the appliance. Removal of the screws is nec-
essary for installing the rubber feet.
NEFL32/42/50FH ILLUSTRATED
NEFL60/72/100FH ILLUSTRATED
installation
EN
15
W415-1542 / G / 02.07.20