Supplies Required - Bradley S19-270C Manuel D'installation

S19-270C, S19-270E, S19274C, S19274E

Supplies Required:

• Piping to ½" NPT water supply inlet on unit
• Pipe sealant
• Inlet strainer (recommended)
• Sign-mounting hardware
Local codes may require the installation of a backflow prevention valve to complete proper installation. Compliance with
local codes is the responsibility of the installer. Valve must be tested annually to verify that it is functioning properly.
Backflow prevention valves are not included with the fixture and may be supplied by the contractor or purchased from
Bradley Corporation.
4 2/5/2015
Bradley • 215-1326 Rev. U; ECN 13-05-032
Installation