Optional Accessory - Makita DHR280 Manuel D'instruction

Rotation with hammering
For drilling in concrete, masonry, etc., rotate the action
mode changing knob to the
carbide tipped bit (optional accessory).
1
2
► 1 . Rotation with hammering 2. Action mode chang-
ing knob
Rotation only
For drilling in wood, metal or plastic materials, rotate
the action mode changing knob to the
twist drill bit or wood drill bit.
1
► 1 . Rotation only
Hammering only
For chipping, scaling or demolition operations, rotate
the action mode changing knob to the
bull point, cold chisel, scaling chisel, etc.
1
► 1 . Hammering only
symbol. Use a tungsten-
symbol. Use a
symbol. Use a
Hook
CAUTION:
Never hook the tool at high loca-
tion or on potentially unstable surface.
► 1 . Hook
The hook is convenient for temporarily hanging the tool.
To use the hook, simply lift up hook until it snaps into
the open position. When not in use, always lower hook
until it snaps into the closed position.
Adjusting the nozzle position of the
dust collection system

Optional accessory

Push in the guide while pushing up the guide adjust-
ment button, and then release the button at the desired
position.
1
► 1 . Guide 2. Guide adjustment button
NOTE: Before adjusting the nozzle position, release
the nozzle forward completely by pushing up the
guide adjustment button.
9 ENGLISH
2
1