General Power Tool Safety Warnings - Makita DHR280 Manuel D'instruction

ENGLISH (Original instructions)
SPECIFICATIONS
Model:
Capacities
No load speed
Blows per minute
Overall length
Rated voltage
Net weight
Optional accessory
Model:
Suction performance
Operating stroke
Suitable drill bit
Rated voltage
Net weight
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Specifications and battery cartridge may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge
BL1815N / BL1820B / BL1830 / BL1830B / BL1840B / BL1850B / BL1860B
• Some of the battery cartridges listed above may not be available depending on your region of residence.
WARNING:
Only use the battery cartridges listed above. Use of any other battery cartridges may cause
injury and/or fire.
SAFETY WARNINGS

General power tool safety warnings

WARNING:
Read all safety warnings, instruc-
tions, illustrations and specifications provided with this
power tool. Failure to follow all instructions listed below
may result in electric shock, fire and/or serious injury.
Save all warnings and instruc-
tions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or BATTERY-
operated (cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
Concrete
Core bit
Diamond core bit (dry type)
Steel
Wood
DHR280 DHR281
373 mm (14-3/4") 404 mm (15-7/8") 373 mm (14-3/4") 404 mm (15-7/8")
3.9 - 5.1 kg (8.6 - 11.2 lbs)
DX03 (For DHR280/DHR282)
Up to 190 mm (7-1/2")
Up to 260 mm (10-1/4")
1.4 kg (3.2 lbs)
2. Do not operate power tools in explosive atmo-
spheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
Keep children and bystanders away while
3.
operating a power tool. Distractions can cause
you to lose control.
Electrical Safety
Power tool plugs must match the outlet. Never
1.
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
2. Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of elec-
tric shock if your body is earthed or grounded.
3. Do not expose power tools to rain or wet con-
ditions. Water entering a power tool will increase
the risk of electric shock.
2 ENGLISH
DHR282
28 mm (1-1/8")
54 mm (2-1/8")
65 mm (2-9/16")
13 mm (1/2")
32 mm (1-1/4")
0 - 980/min
0 - 5,000/min
D.C. 36 V
DX04 (For DHR281/DHR283)
350 l/min
D.C. 18 V
1.5 kg (3.2 lbs)
DHR283