Publicité
Les langues disponibles
Les langues disponibles
Before your first use:
Carefully unpack the unit and remove all packing materials. Select a flat, heat-resistant
non-flammable surface to place the unit. Do not immerse the appliance in water or other liquid.
To remove any dust that may have accumulated on the removable parts during packing, clean
the surface with damp cloth and remove any stickers (except for any warning/caution stickers).
Wash the bowl container in warm soapy water. Rinse and dry thoroughly.
Operating instructions:
Firstly, plug the AC Main, the Vacuum Marinator Power Light will on. Insert the vacuum tube to
the vacuum pot and turn vacuum pot the knob to "VACUUM" position. Press the
"vacuum switch" and start to vacuum and take out all the air from the vacuum pot. When the pot
inside reach to completely vacuum (about ~45KPa), the "finished" light
will on about 3 – 5 seconds, the pump will stop working and the "finished" light will off.
Publicité
