Carl Valentin SPECTRA 107/12 Mode D'emploi page 90

Spectra
Key:
Key:
Key:
Key:
Key:
Key:
Key:
Key:
Key:
Key:
90
Printer language:
Selection of language in which you want to display the text in the printer display.
At the moment the following languages are available: German, English, French, Spanish,
Portuguese, Dutch, Italian, Danish, Finnish, Polish
Keyboard layout:
Selection of region for the desired keyboard layout.
Customized entry
On: The question referring the customized variable appears once before the print start at the
display.
Auto: The question referring the customized variable appears after every printed layout.
Off: No question appears at the display. In this case the stored default value is printed.
Hotstart:
On: Continue an interrupted print order after switching on the printer anew.
(Only if printer is equipped with option Compact Flash card)
Off: After switching off the printer the complete data is lost.
Autoload:
On: A label which was loaded once from the memory card can be loaded again automatically
after a restart of printer.
The last loaded label from memory card is always again loaded after a restart of printer.
Off: After a restart of printer the last used label must be again loaded manually from the
memory card.
A common use of the functions Autoload and Hotstart is not possible.
Manual reprint:
Yes: I In case an error occurred and printer is in stopped mode then you can reprint the last
printed labels by means of keys
No: Only blank labels were advanced.
Backfeed / Delay
Backfeed: The backfeed was optimised in the operating modes dispenser (optional), cutter
(optional) and tear off. Now, when driving into the offset, the following label is 'pre-printed' if
possible and therefore the backfeed of label is no necessary and time can be saved.
Delay: The adjustable deceleration time is only for mode 'backfeed automatic' of importance
Password:
By a password several functions can be blocked, so the user cannot work with them.
Label confirmation:
On: A new print order is only printed after confirmation at the device.
An already active continuing print order is printed as long as the confirmation is effected at the
device.
Off: No query appears at the display of control unit.
Standard label:
On: If a print order is started without previous definition of label, the standard label (device
type, firmware version, build version) is printed.
Off: If a print order is started without previous definition of label, an error message appears in
the display.
English
and .