ENGLISH
12
The Li-Ion battery may be charged at any time
without the service life being shortened as a result.
Charging interruption does not damage the battery.
1. Take the battery out of the appliance. For that
purpose, press the side snap (pic. 2).
2. Insert the plug (pic. 2) in the battery outlet and
plug the charger electric cable to the appropriate
socket.
Red diode indicates charging.
3. The charger will finish the charging automatically
after the battery has been fully charged (after app. 3-5
hours). Green diode is on.
Due to the intelligent charging, the battery charging
state is automatically recognised and the battery is
always charged by the optimum charging current,
depending on the temperature and voltage. By
this, the battery is treated smoother and stays fully
charged when kept in the charger.
Caution: Charging is only possible when the battery
temperature is within the admissible temperature
range. See the instructions on the battery.
Charging instructions
The charger may get warm in continuous or
consecutive charging cycles with no interruption.
However, this is not a defective state and it is no
technical defect of the charger.
A significantly shortened operation time after
charging indicates that the battery is worn out and it
must be replaced.
The battery has been fitted with an NTC temperature
sensor, allowing charging within 0°C - 40°C only. Long
service life of the battery is achieved by this.
The Li-Ion battery is protected against deep discharge
"Electronic Cell Protection (ECP)". Due to the fuse, the
garden appliance gets switched off when the battery
is discharged: The garden appliance stops working.
Stop pressing the On/Off button when the
garden appliance is automatically switched off.
The battery may get damaged.
Operation
when working, keep the battery-operated leaf blower
app. 3 cm above the ground at all times.
Do not blow hot, flammable or explosive materials
together.
Emergency Action
Apply the first aid adequate to the injury and get
qualified medical assistance as quickly as possible.
Protect the injured person from more accidents and
calm him/her down.
For the sake of eventual accident, in accordance with
DIN 13164, a workplace has to be fitted with a first-aid
kit. It is essential to replace any used material in the
first-aid kit immediately after it has been used. If you
seek help, state the following pieces of information:
1. Accident site
2. Accident type
3. Number of injured persons
4. Injury type(s)
Guarantee
The guarantee solely covers inadequacies caused by
material defect or manufacturing defect.
Original payment voucher with the sales date needs
to be submitted for any claim in the guarantee period.
The guarantee does not cover any unauthorised
use such as appliance overloading, use of violence,
damage as a result of any unauthorised interference
or caused by foreign items. Failing to follow the ope-
rating and assembly instructions and common wear
are also not included in the guarantee.
Service
Any technical questions? Complaint? Do you need
spare parts or operation manual?
Go to our website www.guede.com and the section
Service will help you quickly and without bureau-
cracy. Please, help us to help you. In order to identify
your device in case of complaint, please indicate serial
number, order number and year of manufacture. All
information is available on the product label. To have
all information always at hand, put them down.
Serial number:
Order-Number:
Year of manufacture:
GBL 200 18 Li-Ion