Fl Ashing Kit; Fl Ush Louvre Kit, Gi-1L (Used Only With S3600Sb); Logo Placement - Napoleon Roxbury Série Manuel D'installation Et D'opération

3.6 fl ashing kit
TRIM
FLASHING
LEVELING
SCREW
OPTIONAL ON/OFF
SWITCH LOCATION
The insert can be equipped with a fl ashing kit to close off most appliance openings. Mount the fl ashing inside
the unit's outer shell using 4 securing screws. The fl ashing and trim are available in many fi nishes to accent any
room decor. Objects placed in front of the appliance should be kept a minimum of 48" (1219mm) away from
the front face.
note:
If desired, the on/off switch can be mounted on the bottom left side of the appliance. See "optional on/off
switch location" above.
3.7 fl ush louvre kit, GI-1L (used only with S3600SB)
UPPER LOUVRES
Insert the back edge of the upper louvre into the upper
louvre clips, as shown.
LOWER LOUVRES
Secure the lower louvre assembly to the insert, using
the 4 screws supplied, as shown.
3.8

logo placement

Remove the backing of the logo supplied and place, as illustrated.
SECURING SCREWS
PIEZO
IGNITOR
VARIABLE SPEED SWITCH
UPPER LOUVRE
FLAME
ADJUSTMENT
KNOB
GAS KNOB
LOUVRE CLIP
1/2"(12.7mm)
LOGO
fi nishing
ON/OFF SWITCH
SECURING SCREWS
SIDE VIEW
1/2"(12.7mm)
W415-2341 / A / 11.14.19
EN
13