Part Names; Top Panel - Pioneer XW-SX70 Mode D'emploi

Contents

Part Names

Top Panel

Preparations
≫ ≫
4
Playback Voice Functions
≫
1. AUX IN Jack: Use a stereo mini plug cable (ø1/8"/3.5 mm) to input the audio
from another unit. ( p14)
2. Input source LED: Repeatedly pressing the INPUT button  causes the LED
corresponding to the selected input source to light or blink.
3. INPUT button: Switches the input to be played.
4. S.BASS button ( p22)
5. LIGHT button ( p19, 20)
6.  button: A short press turns the power on or off.
7. Microphone: Use when the voice assistant is running and when making
p27, 28)
handsfree calls. (
8. VOICE button: Use to start the voice assistant and to receive and end
handsfree calls. ( p27, 28)
9. BASS Knob ( p23)
10. TREBLE Knob ( p23)
11. VOLUME Knob: Use to adjust the volume. Adjust between 0 and 50 when
playing music and between 1 and 16 when the voice assistant is running and
when making handsfree calls.
• When Volume Limit ( p21) is enabled (default value), the upper limit for
the volume when playing music is 45.
Top Panel≫ Front Panel≫ Rear Panel≫
Setup
≫ ≫