Usb Memory Device - Pioneer XW-SX70 Mode D'emploi

Contents

USB Memory Device

You can play music files stored on a USB memory device.
Basic Operations
Preparations
≫
Press repeatedly
Playback Voice Functions
≫ ≫
Perform the following procedure when this unit is
on.
1. Plug your USB memory device with the music
2. Repeatedly press the INPUT button until the
3. When the music files recorded on the USB
(LIGHTING)
• The USB port of this unit complies with the
• Note that operation is not always guaranteed for
12
Top Panel≫ Front Panel≫ Rear Panel≫
≫
files into the USB port of this unit.
"USB" LED starts to blink, and change the input
source to "USB".
memory device have been loaded, the "USB"
LED changes from blinking to lighting, and play
starts automatically.
• The "USB" LED blinks slowly if there are no
files that can be played on the USB memory
device.
• It is not possible to specify a folder or music
file to play.
• The order of playback is normally the order in
which the music files were written to the USB
memory device. However, specifications differ
between USB memory devices, so it may be
different to the writing order.
• Using the Pioneer Club Sound App ( p24)
enables you to control play using features
such as skip and shuffle.
USB 2.0 standard. The transfer speed may be
insufficient for some content you play, and sound
interruptions, etc. may occur.
all USB memory devices.
Setup
≫