Various Settings - Pioneer XW-SX70 Mode D'emploi

Contents

Various settings

You can configure advanced settings to have a more enjoyable experience with this unit.
Setting Item Default Value
Auto Standby On
BLUETOOTH On
Wakeup
Preparations
≫
Setting Details
This setting allows the unit to enter standby mode
automatically after 20 minutes of inactivity without
any audio input.
With the input selector at AUX, press and hold
the STEREO PAIR button for about 1 second and
confirm the setting status.
You can turn on or off by pressing and holding the
STEREO PAIR button for about 3 seconds.
"On": The unit automatically enters standby mode.
(The front panel illumination LED lights or blinks
blue)
"Off": The unit does not automatically enter
standby mode. (The front panel illumination LED
lights or blinks red)
This function wakes up the unit on standby by
connecting a BLUETOOTH-enabled device.
With the input selector at AUX, press and hold the
S.BASS button for about 1 second and confirm the
setting status.
You can turn on or off by pressing and holding the
S.BASS button for about 3 seconds.
"On": When this function is used. (The front panel
illumination LED lights or blinks blue)
"Off": When this function is not used. (The front
panel illumination LED lights or blinks red)
Playback Voice Functions
≫ ≫
Setting Item Default Value
BLUETOOTH On
30
Top Panel≫ Front Panel≫ Rear Panel≫
Setup
≫
Setting Details
Select whether or not to use the BLUETOOTH
function.
With the input selector at AUX, press and hold the
CHAIN button for about 1 second and confirm the
setting status.
You can turn on or off by pressing and holding the
CHAIN button for about 3 seconds.
"On": Enables connection with a BLUETOOTH
wireless technology enabled device by using the
BLUETOOTH function. Select "On" also when
making various BLUETOOTH settings. (The front
panel illumination LED lights or blinks blue)
"Off": When not using the BLUETOOTH function.
(The front panel illumination LED lights or blinks
red)
≫